| Home | Request a Quote | Privacy | Contact 2009 Copyright SOS Environmental, Inc. All rights reserved Site by MH1 Web Design |
Specialty & Custom Chemicals
Oil & Gas Chemicals
Quality stimulation products designed for the oil and gas industry, including
solutions for scale removal, drilling damage removal, clay damage, and
innovative frac fluids.
AF-100 - Foaming Agent
AS-2200 - Anti-Sludge Acid Additive
CSD-2112 - Calcium Sulfate Dissolver
DP-10 - Oil Herder
EAS-System - Emulsified Acid System
FDR-1100 - Formation Damage Removal
FWC-1100 - Formation and Wellbore Cleaner (Alternative Acid Treatment)
HRS-820 - Hydrate Removal System
IRA-50 - Iron Reducing Agent
ISR-1100 Stim-Series - Iron Sulfide Removal System
MS-100 - Micellar Stimulation Additive
NEA-100 - Non-Emulsifying Agent
PA-100 Series - Paraffin/Asphaltene Package
PA-721 - Paraffin/Asphaltene System
PFI-440 - Packer Fluid Inhibitor
SDR-2100 - Salt Deposition Removal
Specialty Coatings
Insulation and fire control, corrosion control, sealants. SOS Environmental
is an authorized distributor of Superior Products International.
Super Therm® | ceramic based, water-borne, insulating coating,
designed to block heat load, moisture penetration, and air infiltration over
a surface and to reduce energy costs. Super Therm® is the most effective
and longest lasting ceramic insulation coating on the market today. Super
Therm® reflects over 95% of the three radiation sources from the sun,
which are ultraviolet, visual light and infra red rays.
Rust Grip® | Seal virtually any surface and protect it against corrosion,
weather and physical wear with Rust Grip®. Rust Grip® is a three-coats-in-
one system that acts as a primer, intermediate, and topcoat with a single
application.
Rust Grip® is a metallic-based, moisture-cure polyurethane encapsulating
coating designed to coat and seal air, moisture, and minerals out of
surfaces. Rust Grip® stands up to acids, salts and caustic materials with
no loss of strength! Download the Rust Grip® brochure.
Moist Metal Grip® | Liquid reinforcement coating protects submerged
surfaces with durable Moist Metal Grip. The two-part epoxy is designed to
provide a water resistant, anti-corrosion coating for wet or submerged
surfaces. Moist Metal Grip is designed to protect metal surfaces already
experiencing moisture or condensation and cannot be stopped and dried.
Enamo Grip® | Enamel Protective Coating is a tough, moisture curing,
two-component polyurethane enamel, which produces a uniquely hard and
durable coating film. ENAMO GRIP will demonstrate unsurpassed semi-
gloss retention, color-retention, graffiti-resistance, and chalk resistance
when utilized for exterior coating situations. ENAMO GRIP will also provide
outstanding resistance to water and humidity, stains, chemicals, and
solvents, as well as exceptional scuff, mark, and impact-resistance.
HPC™ | High Temperature Coating Get heat protection that surpasses
conventional insulation with HPC™ Coating. HPC™ Coating is a ceramic
based, water-borne insulating coating designed to insulate in high
temperature situations. Use HPC™ Coating as a base coat/primer or build
layers for additional protection.
HSC™ | Medium Temperature Coating Get heat protection that
surpasses conventional insulation with HSC™ Coating. HSC™ Coating is a
ceramic based, water-borne insulating coating designed to insulate in
medium temperature situations. Use HSC™ Coating as a base coat/primer
or build layers for additional protection
Lining-Kote | Strong Protection against Corrosion Protect against the
harshest acids, bases, chemicals and solvents with Linking-Kote. Lining-
Kote‘s two-part epoxy composition provides durable and flexible protection.
Omega Fire™ | Versatile Fireproofing Coating Build extra safety into
structures with Omega Fire™, a ceramic-loaded, water-borne fireproofing
coating. Omega Fire™ stays intact above 2000 degrees F (1100 degrees
C) and has a 2 to 3 hour fire rating.
SP Interlock™ | a water borne sealant and preservative specifically for
conditioning concrete structures to solve the damaging problems caused
by water, freeze/thaw, acids, caustics, bacteria, salt erosion, oils, juice
penetration, " toxic black mold ", algae, mammal excrement, and other
such pollutants.
It solves problems resulting from dusting, algae formation, soft concrete,
loss of strength, spalling, sulfate and nitrate degradation, saponification
(causes vinyl tiles, paint, polyurethane and epoxy coatings to peel off) or
simple efflorescence (ordinary concrete disintegration). Used to seal
concrete flooring, walls, blocks, pipes or other concrete substrates.
Can't find what you are looking for?
Contact SOS Environmental to discuss the chemical solution you need.
Oil & Gas Chemicals
Quality stimulation products designed for the oil and gas industry, including
solutions for scale removal, drilling damage removal, clay damage, and
innovative frac fluids.
AF-100 - Foaming Agent
AS-2200 - Anti-Sludge Acid Additive
CSD-2112 - Calcium Sulfate Dissolver
DP-10 - Oil Herder
EAS-System - Emulsified Acid System
FDR-1100 - Formation Damage Removal
FWC-1100 - Formation and Wellbore Cleaner (Alternative Acid Treatment)
HRS-820 - Hydrate Removal System
IRA-50 - Iron Reducing Agent
ISR-1100 Stim-Series - Iron Sulfide Removal System
MS-100 - Micellar Stimulation Additive
NEA-100 - Non-Emulsifying Agent
PA-100 Series - Paraffin/Asphaltene Package
PA-721 - Paraffin/Asphaltene System
PFI-440 - Packer Fluid Inhibitor
SDR-2100 - Salt Deposition Removal
Specialty Coatings
Insulation and fire control, corrosion control, sealants. SOS Environmental
is an authorized distributor of Superior Products International.
Super Therm® | ceramic based, water-borne, insulating coating,
designed to block heat load, moisture penetration, and air infiltration over
a surface and to reduce energy costs. Super Therm® is the most effective
and longest lasting ceramic insulation coating on the market today. Super
Therm® reflects over 95% of the three radiation sources from the sun,
which are ultraviolet, visual light and infra red rays.
Rust Grip® | Seal virtually any surface and protect it against corrosion,
weather and physical wear with Rust Grip®. Rust Grip® is a three-coats-in-
one system that acts as a primer, intermediate, and topcoat with a single
application.
Rust Grip® is a metallic-based, moisture-cure polyurethane encapsulating
coating designed to coat and seal air, moisture, and minerals out of
surfaces. Rust Grip® stands up to acids, salts and caustic materials with
no loss of strength! Download the Rust Grip® brochure.
Moist Metal Grip® | Liquid reinforcement coating protects submerged
surfaces with durable Moist Metal Grip. The two-part epoxy is designed to
provide a water resistant, anti-corrosion coating for wet or submerged
surfaces. Moist Metal Grip is designed to protect metal surfaces already
experiencing moisture or condensation and cannot be stopped and dried.
Enamo Grip® | Enamel Protective Coating is a tough, moisture curing,
two-component polyurethane enamel, which produces a uniquely hard and
durable coating film. ENAMO GRIP will demonstrate unsurpassed semi-
gloss retention, color-retention, graffiti-resistance, and chalk resistance
when utilized for exterior coating situations. ENAMO GRIP will also provide
outstanding resistance to water and humidity, stains, chemicals, and
solvents, as well as exceptional scuff, mark, and impact-resistance.
HPC™ | High Temperature Coating Get heat protection that surpasses
conventional insulation with HPC™ Coating. HPC™ Coating is a ceramic
based, water-borne insulating coating designed to insulate in high
temperature situations. Use HPC™ Coating as a base coat/primer or build
layers for additional protection.
HSC™ | Medium Temperature Coating Get heat protection that
surpasses conventional insulation with HSC™ Coating. HSC™ Coating is a
ceramic based, water-borne insulating coating designed to insulate in
medium temperature situations. Use HSC™ Coating as a base coat/primer
or build layers for additional protection
Lining-Kote | Strong Protection against Corrosion Protect against the
harshest acids, bases, chemicals and solvents with Linking-Kote. Lining-
Kote‘s two-part epoxy composition provides durable and flexible protection.
Omega Fire™ | Versatile Fireproofing Coating Build extra safety into
structures with Omega Fire™, a ceramic-loaded, water-borne fireproofing
coating. Omega Fire™ stays intact above 2000 degrees F (1100 degrees
C) and has a 2 to 3 hour fire rating.
SP Interlock™ | a water borne sealant and preservative specifically for
conditioning concrete structures to solve the damaging problems caused
by water, freeze/thaw, acids, caustics, bacteria, salt erosion, oils, juice
penetration, " toxic black mold ", algae, mammal excrement, and other
such pollutants.
It solves problems resulting from dusting, algae formation, soft concrete,
loss of strength, spalling, sulfate and nitrate degradation, saponification
(causes vinyl tiles, paint, polyurethane and epoxy coatings to peel off) or
simple efflorescence (ordinary concrete disintegration). Used to seal
concrete flooring, walls, blocks, pipes or other concrete substrates.
Can't find what you are looking for?
Contact SOS Environmental to discuss the chemical solution you need.
| Texas - Louisiana - Oklahoma - Alabama | (281) 723-8282 | contact |
Brochure
Download the Superior Products
International brochure
Download the Superior Products
International brochure
SPI Oil field & Petrochemical
Applications
Download this pdf
Applications
Download this pdf